Concept
We give you more information than anybody else.
Swimming pool and spa enclosures are made with care. We use top quality materials and our production is approved by ISO 9001, ISO 14001 and AFNOR certification.
High quality procedure of quality control, high technologies, fast and reliable services is a must. We meet these standards and we always deliver 100% product.
Effect of an enclosure on air and pool temperature:
The polycarbonate panels act like a greenhouse. Direct exposure to the suns rays or, on cloudy days, the effect of diffused rays warms the air within the enclosure. At night or on cooler days the heat of the enclosed atmosphere is gradually lost.
At the start of the season the water temperature in an unheated pool rises by 2°C per day when exposed to direct sunlight.
The water temperature also rises on clear days even when there is no direct sun. Evaporation of water from the pool leads to loss of heat. If the temperature difference between water and air is 3oC, a 32 m2 pool will lose 40 litres of water per day, and an 80 m2 pool will lose 100 litres per day. An enclosure – by isolating the water surface from the external atmosphere and by decreasing the thermal gradient – slows down the evaporation of water from the pool.
An effective additional method of reducing water evaporation is to spread a solar bubble or foam covers over the water surface. Solar bubbles directly exposed to sun and frost are not durable and become dirty easily. But when they are used under an enclosure they perform their function very well. The combination of a bubble or a foam cover with an enclosure is a highly successful way of reducing water heating costs.
The use of a suitable heat retention cover is strongly recommended to reduce evaporation, which is the cause of condensation.
If you get too warm inside, just move the segments of the enclosure, and in a few moments you will be swimming in the open air.
Protecting against heavy snow:
During winter, snow should not be allowed to accumulate on the enclosure in large quantities. A 10cm layer of wet snow weighs up to 100kg/m2. Large enclosures are most at risk. If a thick layer of snow is left on the top surface of the enclosure, damage may occur. In areas of high snowfall the segments of the construction can be retracted. It is also possible to attach supporting poles, which can be supplied by us or by the user.
Protecting the enclosure against strong winds:
The unique coupling system and ground rail system of the mobile segments will ensure the structure is secure in strong winds.
Cleaning:
The polycarbonate can be cleaned regularly in order to remove dirt from the surface. In most cases it’s as easy as rinsing it with a stream of water. In case of heavy dirt it should be gently wiped with a soft cloth or extensible mop and a detergent, with frequent rinsing.
Resistance to external conditions:
The structure is amazingly resistant to normal outdoor conditions – moisture, sunlight, rain/snow, low and high temperatures easily operating efficently in temperatures from ranging -50o C to 115o C.
Sliding the segments:
An enclosure consists of segments which can be moved easily and freely on rails in both directions. Watch the video below to see how easy it is to use the pool enclosure.
